หมวดหมู่สินค้า
| Product image | Type | Description |
| UCAM-60C M14, UCAM-65C M14 Data Logger | Saving the long-term saving measured results to the built-in memory (Approx. 1.8 GB), USB memory ensures easy data collection, Up to 1000 channels measurement, (With external scanners USB-70B series), Measurement up to 20000 ×10-6 strain with a resolution of 0.1 ×10-6 strain (With full bridge system), All-in-one measuring instrument (UCAM-60C M14), Online data logger fully controlled from the PC (UCAM-65C M14) |
 | UCAM-550A Fast Data Logger | Synchronous sampling of all channels, Synchronously sample at 50 Hz for 1000 channels, 5 types of measuring units available |
| NTB-500C Medium Speed Network Terminal Box | CAN interface, Measurement of large strain (300 k ×10-6 strain), Strain, voltage, and thermocouple units provided |
| Network output conforms with to CAN, enables a single wire connection, Digitized data transmission thereby strong against noise, Compact & lightweight, so easy to install on site | |
| SME-30A/31A/100A/101A Handy Data Logger | Built-in bridge circuit for direct connection of a strain gage, Wide measuring range: ±300 k ×10-6 strain, Driven by AA batteries |
| Input signals of strain or voltage can be selected channel by channel., 4 unit synchronous sampling using the Stacking Connector Set ST-1A (Optional accessory), TEDS compatible (UI-10A and UI-11A), Sampling frequency: Max. 10 kHz | |
| PCD-400B Sensor Interface | 4 unit synchronous sampling using the connection connector set ST-1A (Optional accessory), TEDS compatible (UI-10A and UI-11A), Sampling frequency: Max. 10 kHz |
| Modular type for easy expansion and up to 128 channels, High installation and flexibility, Shock resistance: 490 m/s2 (50 G), All channels synchronous 20 kHz (For 4 channels), Measurement of 1 channel at max. 100 kHz, Wireless real-time monitoring is possible (When using wireless LAN unit), CAN FD compatible (When using CAN unit) | |
| Compact & lightweight, With stacked connection, no synchronization cable is required, therefore wiring-saving., Max. sampling frequency 20 k Hz for 4 channels of a single measuring unit in sync., Sensors are easily connected with one-touch input cables or input adapters. | |
| Available with 1, 2 and 4 slots, LAN port for establishing multichannel network (Max. 256 channels) | |
| Incorporated real-time digital filter., 8th digital filter enables acquisition of clear waveform., High-speed/low-speed dual sampling, Measurement of high-speed and low-speed phenomena while reducing data quantities is possible., All channels synchronous 10 kHz high-speed sampling (For 32 channels), Measurement of 3 channels synchronous at max. 100 kHz, EDX-200A-4T can operate under high or low temperature range -20 to 65ºC, One-wire synchronous (Except EDX-200A-1), With a maximum of 8 units, large scale measurements in distributed arrangement can be supported. | |
| High-speed sampling at 200 kHz/32 channels, Up to 80 input channels, Simultaneous recording of measuring data and video, Conditioner cards selectable for specific applications, Effective real-time processing capability | |
| Conditioner Cards for EDX Series | Conditioner cards for EDX-100A, EDX-200A, and EDX-5000A., EDX-5000A does not support CAN card CAN-41A. |
| Measures CAN data and GPS information., With 8-bit digital I/O | |
| Suitable for long-term measurement in the absence of personnel under the environment without external power supply, Small & lightweight 1-channel model, Equipped with a display used to confirm setting conditions and measured values, Easy to collect data by USB memory | |
| Display is provided to enable confirmation of setting conditions and measured values., Data can easily be collected in USB memory., No control software required. Keys are provided for operation as an independent unit., Measurement with thermocouples possible (K, T), Compact & lightweight 10-channel model | |
| Monitoring any 8-channel data, Touching the panel to control the EDX-100A and EDX-200A, Setting channel conditions, (Measure ON/OFF, channel modes, measuring range, LPF, sampling frequencies, etc.), Confirming recorded data on the spot |