สินค้าของเรา
Transducers » Automotive
Product imageTypeDescription
lpr-ckeyvisual01

LPR-C

Thin Pedal Force Transducer

Easy mounting applicable different pedal configurations and offset load provide low output errors.
LPR-D-S1

Thin 2-component Pedal Force Transducer
Thin pedal component force transducers that allow measurement with a feel close to actual pedal operation.
They can be secured to measurement targets of various shapes using a bolt or Velcro tape.

LB-B

Hand Brake Operating Force Transducer

Easy to install to hand brakes on the market. The LB-B is a load cell to measure tension of hand brakes. Adopting a universal joint, the LB-B measures the tension accurately.

LSA-A-S1

Gear-change Lever Operating Force Transducer

Transducers used on a vehicle's floor shift gear stick to measure component force in two directions when shifting gears.
swheeltorquekeyvisual02
Wheel Torque Transducer

● Measure wheel torque while the automobile is in motion

●Slip-rings ensure easy handling. ●Can be used for braking tests and traction control operation tests ●Thin and light

●Simultaneous output of rotation angle is possible by installing an angle detector (optional)

In-wheel Torque SensorApplicable to braking and driving measurements

SFA-E-SA20

Steering Force/Angle Transducer

This unit is thin and lightweight design, easy to mount to and remove from the steering shaft. Strain gages are used to detect steering force (torque) and equipped with strain amplifier. Rotary encoder for steering angle detection is used and enable high resolution. Dedicated indicator is also available for indication of steering force and steering angle.

SFA-F-SA

Steering Force/Angle Transducer

Easy disconnection from steering shaft, This unit is easy to mount to and remove from the steering shaft, and both steering force (torque) and steering angle can be output as strain. *Type that adds output for small angles (rated ±160°) output can also be manufactured.
sfa-h-sakeyvisual01

SFA-H-SA

Steering Force/Angle Transducer

Lightweight, for easy disconnection General from steering shaft, Unit is lightweight, for easy mounting to and removal from the steering shaft

LSG-A

Grip-design Steering Operation Force Transducer

To evaluate the steering operational force from hand to steering wheel
lbt-ekeyvisual01

LBT-E-SA1-IDT

Seat Belt Tension Transducer

Even more compact and lightweight than former models. Additionally, the LBT-E-SA1-IDT improved nonlinearity with a built-in compensation circuit. This product has 2 types - left seat type and right seat type - depending on the cable direction. Cable exchangeable model is also available by using connectors.
lbt-a-20knsa1keyvisual01

LBT-A-20KNSA1-IDT

Seat Belt Tension Transducer

Measuring Impact-Initiated Tension of Seat Belt in Crash Tests, Using a strain gage, the LBT-A-20KNSA1-IDT detects the impact-initiated tension applied through the dummy to the seat belt.
lbt-d-100nsa1-hkeyvisual01

LBT-D-100NSA1-H

Seat Belt Tension Transducer for CRS

To use for measuring tensile force to install CRS (Child Restraint Seat), Measure the sensor of seat belt tension. Compact, lightweight and disassembly-friendly design.
lbt-b-200nsa1-pkeyvisual01

LBT-B-200NSA1-P

Seat Belt Tension Transducer for CRS

Compact, Lightweight, and Easy to Install and Remove, Designed to measure the belt tension to fix the child seat, the LBT-B-200NSA1 is compact, lightweight and designed to be easily attached to, or removed from the belt.

Dummy-mounted Sensors

We design and manufacture sensors for load cells (component force transducers) installed in crash test dummy. Please contact us regarding the design and manufacturing of specialized sensors for dummy installation as well.

LBR-S-1KNSA2

Hand Brake Operating Force Transducer

The LBR-S is a load cell to measure tension of parking brakes. It can be install to a parking brakes easily. The transducer can measure vertical force applied to the parking brake accurately.